Standard setup

The Brewing Systems ships standard with one 3-way valve. This will normally be placed on the right side of the system, but if you don't want to sparge using the internal pump, you can install it on the left side to enable whirlpooling. Remember to get an extra dip tube if you want to use this option

By adding more valves, the flexibility will increase, and you can partly or completely avoid having to disconnect tubing or pipes during your brewday. What setup is the best, is subjective. A general advice is to start with the 2-valve starter pack and expand as you get more experience

 

The product is in stock.
The product is ordered from the supplier and the delivery date is confirtmed.
The product is ordered from the supplier, but the delivery date is not confirmed.
The product has to be ordered from the supplier
This product is located on the remote storage.
The product is ordered from the supplier, but the delivery date is not confirmed.
The goods ordered from our supplier's stock.
Unverified - Please contact customer service for more information.